The Visioscan® VC 20plus
Skin Topography Directly Measured by Visioscan® VC 20plus
The Visioscan® VC 20plus is a unique UVA-light video camera with high resolution to study the skin surface directly.
The SELS®parameters (Surface Evaluation of the Living Skin) have been developed especially for this camera and are used in numerous studies. The images show the structure of the skin and the level of dryness very impressively.
The camera can be used on pigmented spots and lesions and on hair. With its multi-functional software, the Visioscan® VC 20plus is a very flexible system to characterize skin surface condition easily, accurately and very economically. It had been used on board of the International Space Station ISS for several years.
Where to use:
There are numerous fields of application efficacy testing and claim support for cosmetics:
- The Visioscan® is indispensable for efficacy testing and claim support for cosmetics, pharmaceuticals and detergents especially in regards to roughness and skin surface topology.
- Typical claims (examples) substantiated with the Visioscan®: anti-wrinkle, anti-aging, smoothing, rejuvenating, anti-roughness, hydrating, against dry/scaly skin, exfoliating, and more.
- Dermatological basic research in humans and animals.
- Occupational medicine: to monitor the state of the skin and show the importance of skin protection products
Quick fact Visioscan® VC 20plus
The camera
- In contrary to conventional colour skin cameras, the Visioscan® VC 20 plus features a unique UV-A LED illumination (proven to present no hazard to normal human skin) in a small, easy-to-handle, ergonomically designed plastic casing. The light is homogenously distributed by a reflector. In addition, the camera consists of a high-resolution b/w video sensor chip, an objective and the new “liquid lens technology”, an electronically controlled lens which automatically adapts to the skin surface distance and maximizes the range of depth of field.
The results are impressive, non-glossy images of the skin surface (size approx. 10 x 8 mm) displayed in 255 grey levels. Wrinkles and lines appear dark and skin scaliness can be seen as very bright pixels. The software analyses the image regarding a variety of topography parameters.
The Software
- The evaluation method SELS® (Surface Evaluation of the Living Skin
- In addition to the valuable SELS® calculations also other interesting parameters can be calculated: lines can be drawn on the images and the profile and the results are shown immediately. Roughness indices for up to 180 lines arranged vertically, horizontally or circularly are immediately available.
- Special parameters have been created to describe virtually the skin topography by VisioScan volume (mm²) and unfolded surface in %.
- Ageing parameters as anisotropy (directionality of the lines) and cell size (polygons between the visible lines) are at your disposal.
younger skin, lines in all directions visible, low anisotropy and more polygons between the lines
aged skin, deep directional lines, less and larger polygons between the lines
- Draw lines and free-hand objects in the picture. They can be measured accurately (e.g. length of hair after shaving, Hair thickness, pigmented spots and lesions, etc.).
measurements of hair length and -thickness
measurements of spots and lesions
- Evaluation of desquamation (scaliness/dryness) of the skin with the foil Corneofix® F 20. A desquamation index is calculated.
- Determination of sebum production with the foil Sebufix® F 16. The sebum production of each sebum gland can be monitored impressively in real time on the screen.
- Worldwide established method with a variety of interesting studies. The Visioscan® had been used on board of the International Space Station (ISS) to monitor the astronauts’ skin state during their stay in space.
- Convenient organisation of images and results in studies. Evaluate all data together by one click.
- Display quickly and easily “3D” images in false colour or grey
values. - A check calibration functions ensures the accuracy of geometry and brightness of the camera.
- Small, easy to handle device for all kind of applications.
- The camera can be fitted to a tripod by its special mount.
- Stable connection by USB directly to the computer.
- The extremely economic system can easily compete with the more expensive, complex devices.
- Display quickly and easily “3D” images in false colour or grey
SELS (Surface Evaluation of the Living Skin)This evaluation method was developed by the Institute for Experimental Dermatology, Prof. Tronnier, University of Witten-herdecke, Germany. The grey level distribution of the image isused to evaluate –within one second – four clinical parameters to quantitatively and qualitatively describe the skin surface as an index:
Skin smoothness (Sesm), Skin roughness (Ser), Scaliness (Sesc), Wrinkles (Sew).
- In addition to the valuable SELS calculations also other interesting parameters can be calculated: Lines can be drawn on the images and the profile and the results are shown immediately. Roughness indices for up to 180 lines arranged vertically, horizontally or circularly are immediately available.
- The Visioscan® VC 20plus be used together with the Skin-Visiometer® SV 700 USB as combination instrument.
- Worldwide established method with a variety of interesting studies. The Visioscan® has even repeatedly been used on ISS space missions.
Skin-Visiometer® SV 700 USB
The Skin-Visiometer® SV 700 USB is an established tool to evaluate the topography (micro relief) of the skin surface by light transmission of a very thin, special blue dyed silicone replica.
Where to use:
The measurement of the depth of the skin micro relief has been a most interesting subject to the cosmetic industry for decades. The Skin-Visiometer® SV 700 is an exact, easy to use, most economical tool for the R&D laboratories or the test institutes for formulation and efficacy testing of anti-aging products.
Quick fact Skin-Visiometer® SV 700 USB
- The very viscous two component silicone, mixed under vacuum to avoid bubbles, fills even smallest skin depths and reproduces them in detail.
- By this method you can easily take your replica all around the globe and be sent to the center for analysis. (ideal for multi center studies or studies involving different ethnic groups)
- The replica can be stored easily over long time periods.
- Extremely quick and convenient connection to computer by USB.
- High resolution images
Software Benefits:
- This special measurement method allows the calculation of various different skin parameters within one second.
- The standard roughness parameters Rt, Rm, Rz, Rp and Ra for up to 180 lines arranged vertically, horizontally or circularly are immediately available.
- Special parameters have been created to describe the skin topography volume (mm²) and unfolded surface in %.
- New topographic information to quantify the direction of lines (anisotropy), intersection of lines and enclosed cells as reliable aging parameters.
- A coloured 3D image can be displayed quickly. Other displays of the image (e.g. relief, false colour, etc.) are possible.
- All results can be stored, then printed out together with the images and are automatically available for spreadsheet analysis (e.g. Excel®).
- Easy and quick calibration of the system is possible at any time.
- With the foils Corneofix® F 20 and Sebufix® F 16 desquamation and sebum production can be evaluated.
- The skin camera Visioscan® VC 20plus with its analysis software SELS (Surface Evaluation of the Living Skin) is also a useful addition to the system.
- Worldwide established method to look at skin’s micro relief with a broad range of studies (Ask for studies).
Visioline® VL 650
Skin macro-relief assessment
The Visioline ® VL650 is used for assessing the skin macro-relief using a replica and oblique lighting. It provides another excellent method for assessing the topography of the skin. It is a further development of the renowned Quantirides® system.
Where to use:
This method has been scientifically acknowled
ged and established for many years to analyse objectively the deeper lines and macro wrinkles such as crow feet. This is especially interesting for claim support of anti-aging and antiwrinkle products.
The measurement is based on shadows on a silicon replica. The replica, which is a negative of the skin su
rface, is illuminated uniformly with a defined light source mounted in a specified angle. The shadows visible on the replica created by the oblique light are captured with a high resolution, quick FireWire camera, which is mounted vertically to the replica. The sophisticated software analyses different characteristics of the wrinkle in real length and depth (in mm) and a shape factor.
Quick fact Visioline® VL 650
- The system is fast to use and requires minimal staff and is therefore very economical.
- It is very easy to handle and does not require specialist knowledge.
- The replica can be stored for documentation.
- Making of the replica and the analysis do not necessarily have to be done at the same time.
- The replica can be analysed at any time when all replicas for one study have been collected.
- It is very reproducible and accurate. To analyse the same area before and after treatment a mask function can overlay the images of the replica over an already previously taken replica to match the same position.
- Four images can be shown on the screen at the same time.
- For each study a separate database can be created and all results and settings are automatically saved there. Thus the follow up of each study is very easy.
- A simple calibration tool enables the user to be sure of the accuracy of distance and depth (x,y,z).
- Special image tools as 3D and false colors illustrate the output for marketing purposes.
CutiScan CS 100
New Method to Measure Viscoelasticity & Anistropy
By CutiScan you are able to measure skin displacement by video while circular suction/relaxation applies to skin (Optical flow). The CutiScan offers a new dimension of looking at the mechanical properties of the skin (viscoelasticity & anisotropy).
Where to use:
There are no limits to applications in efficacy testing and basic research wherever skin aging and elastic properties play a role.
Quick fact CutiScan CS 100
- Information not only about the elastic and viscoelastic properties but also on anisotropy and directionality of the skin
- For each measurement a complete video is available
- From that video a graph consisting of 360 elasticity curves is calculated and all curves can be saved in Excel®.
- Overall measurement graphs are available: overall maximum and minimum amplitude and overall visco-elasticity and can also be transferred in Excel® by one mouse click.
Visiopor® PP 34 N
The Visiopor can be used to visualize porphyrines (bacterial pigments from Propionibacterium acnes creating comedones and later acne) through fluorescence. Porphyrines show as orange-red spots in the pores under a specific UV light. There are numerous applications for both skin and scalp especially in the field of acne treatment and management.
It comes with an easy to handle evaluation software (distinguishing the reddish-orange porphyrines of the bacteria from other yellowish-greenish fluorescents in quantity, size and intensity)
Visiopor® PP 34 N
Quick fact Visiopor® PP 34 N
- The Visopor® is USB based and can be connected directly to a
computer. - Non-invasive, easy to use and economic.
- Detection of early invisible lesions and visualization of advanced small acne lesions.
- Promotion of anti-bacterial products, cleansers and drugs against P. acne.
- Monitoring the course of treatments.
Sebufix® SF 16
The Sebufix® F16 is a special foil absorbing the sebum of the skin surface due to its micro pores and showing them as spots in different sizes. When mounted on the Visioscan® camera, the qualitative sebum production can uniquely be monitored in real time. The foil is applied to the skin and the sebum will become visible as transparent spots in various sizes after only a few seconds. The lateral spread of sebum in the foil is minimized. Skin with low sebum content shows a few small spots, whereas oily skin is visualized by a great number of large spots.
Where to use:
- The Sebufix® F 16 is a very helpful tool for investigating the activity of the sebacious glands
- it is important for claim support and efficacy testing of all kinds of cosmetic and pharmaceutical products (especially cleansers, anti-acne products, products for oily skin)
Quick fact Sebufix®
- Quantitative sebum measurements along with qualitative approach.
- The very quick measurement without any glue has no occlusion effects on the skin thereby avoiding incorrect results.
- The measurement is not influenced by the hydration level of the skin (sweating).
- By Visioscan® skin camera ,the sebum production can even be monitored live over a given period on on the screen.
- With the software the number, size and area covered with spots (mm”) can be evaluated for 5 different sizes of spots (very small to large).
Corneofix® CF 20
Desquamation Collector Foil
Corneofix® CF 20 is a special adhesive tape collecting corneocytes (flakes of dead cells). The number, size and thickness of the corneocytes indicate the desquamation/hydration level of the stratum corneum. When mounted on the Visioscan® camera, the desquamation can be evaluated by its software.
The adhesive side of the Corneofix® is applied to the skin area to be measured for only a very short time. On removing the tape from the skin the corneocytes stick to the tape. Many thick, large corneocytes can only be collected when the skin is dehydrated or even damaged. Moist skin shows small regular flakes.
Where to use:
- In cosmetology, the moisture content of the skin is one of the most important parameters for formulation and efficacy testing. Typical claims substantiated with the Corneofix®: supports skin renewal, exfoliating, against dry/scaly skin, and more.
- The Corneofix® is perfectly suitable for skin surface strippings for the various applications.
Quick fact Corneofix® CF 20
- The method is quick, easy and economical.
- The foils come in a convenient dispenser box and are easy to take out.
- The Corneofix® F20 is a perfect addition to the Visioscan®skin camera or the Visiometer® to digitalize the flakes on the screen. With the software the number, size and area covered with flakes can be evaluated as well as the desquamation index well known in literature.
- There is a number of studies performed with this interesting foil.
Aeva-HE
High resolution 3D solution for
skin topography,
face topology and
body morphology changes
Aeva-HE
Based on a patented fringe projection unit combined with stereo imaging techniques, the AEVA-HE system offers best performances and flexibility to address different studies/measurements from wrinkles reduction to body reshaping. It is designed to quantify efficacy assessment for cosmetics, aesthetical and dermatology products and treatments.
Thanks to different Filed Of View (FOV) by simply changing objectives sets, it’s possible to switch from small to large measurement areas (from skin structure to body part).
| Field Of View | FOV-S
110 |
FOV-M
170 |
FOV-L
250 |
FOV-XL
480 |
| Local | ✓ | ✓ | ✓ | |
| Global Face | ✓ | ✓ | ✓ | |
| Body Parts | ✓ |
Local zone: Skin micro structure, pores, fine lines & wrinkles evaluation, skin replica, eye bags, lips and sagging, cheek, nasal folds, glabella, dimples and nodules for cellulite
Global face: rejuvenation, fillers, mesotherapy, firming, reshaping, restructuring, anti-ageing
Body part: firming, slimming anti-cellulite
Watch the video
System Configuration
Technology
The state of the art combining fringes projection and stereovision, also called active stereometry, provides largest fields of view with the highest resolution. It offers pixel resolution in X, Y, high accuracy in Z, less sensitive to movement. Based on high quality and stability components, different fields of view are available by simply changing objectives sets to switch from small to large measurement areas (from skin structure to body part)
It employs an interchangeable sensor system with the appropriate resolution for a variety of applications:
- Highest resolution local measurement (FOV-110 , 170)
- High resolution whole face measurement (FOV-250)
- Global measurement covering a part of the body (FOV-480)
In addition, it is equipped with a unique alignment (image superposition) algorithm, and when superimposing, it does not identify wrinkles but superimposes based on the curve and shape of the measurement surface itself. Therefore, even if wrinkles change due to moisturizing, etc., it is possible to identify the same part and accurately superimpose the images before and after the treatment for evaluation.
Dedicated Positioning Bench
The panelists are installed on the visio-4D or into the visioTOP 500 bench for stable and repeatable positioning and re-positioning between the different measuring times points. Managing the volunteers and getting reliable and repeatable results becomes much easier.
Face Mode: The volunteer is sitting and is adjusted in height using a motorized actuator to be in the right position relative to the head and keeps limiting its movements. A laser and a mirror allow the person to place his face repeatedly at each time.
Body Mode: The volunteer is standing and adjusted so that he has a comfortable position to keep maintaining the system. The laser is used to position the person repeatedly at each time. As an option you can have a rotating plate allowing to acquire the body automatically without operator intervention.
Powerful Software Aeva-V4
New Aeva software (Aeva-V4) guides the user through acquisition routine, runs automatic batch processing and evaluation of the 3D data providing results as CSV files, figures and pictures. It offers unique multi zones, multi-scaling analysis functionalities.
visio-4D Universal Bench
for body and face
VisioTOP-500 Bench for Aeva-HE
for Local & Global Face
Software Aeva-V4
Where to use:
Local zone: Skin micro structure, pores, fine lines & wrinkles evaluation, skin replica, eye bags, lips and sagging, cheek, nasal folds, glabella, dimples and nodules for cellulite
Global face: Topology changes: re-pulping, firming, fine lines & wrinkles visibility*, oval and sagging
Body part: Morphology changes: Thigh, Abdomen,waist, breast, neck, calf, arms, dimples and nodules for cellulite
Quick fact Aeva -HE:
- A patented fringe projection unit combined with stereo imaging techniques
- Automatic or interactive areas extraction
- Amplitude, roughness, volume, areas, circumference evaluation
- High resolution system (2 x 5 Mpixels cameras)
- Easy to switch from an application to an other
- Interchangeable fields
- Very powerful analysis and evaluation software.
- Simple to use, minimum setting and skill required
DermaTOP-HE
High-end 3D imaging system
Micro relief
Texture , Wrinkles
And Fold
DermaTOP-HE
A non-contact skin topography system used for research and development and evaluation of skin care cosmetics, anti-aging products and treatments.
Based on a patented fringe projection unit combined with stereo imaging techniques, the DermaTOP-HE system offers best performances and flexibility to address different studies/measurements from Skin micro structure to wrinkles and sagging. It is designed to quantify efficacy assessment for cosmetics, aesthetical and dermatology products and treatments.
Thanks to different Filed Of View (FOV) by simply changing objectives sets, it’s possible to switch from small to medium measurement areas (from local skin to face part ).
| Field Of View | FOV-S
60 |
FOV-M
125 |
| Local | ✓ | ✓ |
| Face part | ✓ |
Local zone: Skin micro structure, pores, fine lines & wrinkles evaluation, skin replica, eye bags, lips and sagging, cheek, nasal folds, glabella, dimples and nodules for cellulite
Face part: rejuvenation, fillers, mesotherapy, firming, reshaping, restructuring, anti-ageing
Watch the video
System Configuration
Technology
The state of the art combining fringes projection and stereovision, also called active stereometry, provides largest fields of view with the highest resolution. It offers pixel resolution in X, Y, high accuracy in Z, less sensitive to movement. Based on high quality and stability components, different fields of view are available by simply changing objectives sets to switch from 60 to 125 (from very local skin structure to part of face skin)
It employs an interchangeable sensor system with the appropriate resolution for a variety of applications:
- Highest resolution local zone measurement (FOV 60)
- High resolution whole face part measurement (FOV 125)
Adopts original fringe projection technology, blue LED light source, 5.0 megapixel high resolution B/Wcamera. It has the flexibility to enable various measurements by changing the lens, for example, from “evaluation of wrinkles” to “evaluation of texture from replica” according to the guidance.
- Image capture, analysis, and evaluation are easy with dedicated software that uses many automatic routines.
- Two levels of “user” and “expert” are adopted.
- Supports simpler operations at the “user” level. Guidance by displaying a step-by-step support image to the operator.
- “Expert” enables interactive analysis. Uses original aging evaluation processing (face).
VisioTOP 300 – Dedicated Positioning Bench
VisioTOP 300 bench has been designed and dedicated for stable and repeatable positioning and re-positioning between the different measuring times points. Managing the volunteers and getting reliable and repeatable results becomes much easier. This bench supports VisioTOP300, EvaSkin and EvaFace for all types of face analysis.
The volunteer is sitting and is adjusted in height using a motorized actuator to be in the right position relative to the head and keeps limiting its movements. A laser and a mirror allow the person to place his face repeatedly at each time.
Repositioning is completely reproduceable thanks to VisioTOP300 and Software AEVA-V4 and will be saved for next measurement.
Powerful Software Aeva-V4
New Aeva software (Aeva-V4) guides the user through acquisition routine, runs automatic batch processing and evaluation of the 3D data providing results as CSV files, figures and pictures. It offers unique multi zones, multi-scaling analysis functionalities.
visioTOP300 Bench for face
Software Aeva-V4
Where to use:
Local zone:
| – 2D or 3D roughness statistics |
| – Height distribution on topographies Statistics (number, volume, area, depth, circumference) on pores |
| – Fine lines, wrinkles and folds |
| – Skin features density of pores |
| – Deviation(pseudo color display),volume of the topographies (eye bags, lips, sagging and oval) |
Face part:
| – Multi zone extraction and analysis |
| – Comparison on the shape changes with statistical deviation and pseudo color display |
| – Volume of the difference, section length, distance between points and angle calculations |
| – Skin features density (pores, fine lines wrinkles and folds) |
| – Section length, distance and angle measurements |
Quick fact DERMATOP -HE:
- A patented fringe projection unit combined with stereo imaging techniques
- Automatic or interactive areas extraction
- Amplitude, roughness, volume, areas, circumference evaluation
- High resolution system (2 x 5 Mpixels B/Wcameras)
- Easy to switch from an application to an other
- Interchangeable fields
- Very powerful analysis and evaluation software.
- Simple to use, minimum setting and skill required
EvaFACE-S5
Standard 3D imaging system
Simple turnkey solution
For full face Topometery
EvaFACE-S5
A non-contact skin topography system used for research and development and evaluation of skin care cosmetics, anti-aging products and treatments.
Based on a patented fringe projection unit combined with stereo imaging techniques, the EvaFACE-S5 system offers best performances and flexibility to address different studies/measurements from full face wrinkles and sagging. It is designed to quantify efficacy assessment for cosmetics, aesthetical and dermatology products and treatments.
EvaFACE measure and analyze the face globally or partially as a three-dimensional image . Furthermore, up to 18 zone parts are extracted and data is analyzed individually. For effect testing of cosmetics and skin care products. Simple, accurate, high-resolution 3D image measurement of fine lines and wrinkles.
| Field Of View | FOV-L
300 |
| Face part | ✓ |
| Global Face | ✓ |
 |
Face part & Global: rejuvenation, fillers, mesotherapy, firming, reshaping, restructuring, anti-ageing |
|
Watch the video
System Configuration
Technology
The state of the art combining fringes projection and stereovision, also called active stereometry, provides largest fields of view with the highest resolution. It offers pixel resolution in X, Y, high accuracy in Z, less sensitive to movement.
EvaFACE equipped with two 5-megapixel black-and-white cameras. Achieves a wide FOV 300 (field of view), full face with high resolution while emphasizing 3D measurement to perform a high resolution face part and global measurement.
- Image capture, analysis, and evaluation are easy with dedicated software that uses many automatic routines.
- Two levels of “user” and “expert” are adopted.
- Supports simpler operations at the “user” level. Guidance by displaying a step-by-step support image to the operator.
- “Expert” enables interactive analysis. Uses original aging evaluation processing (face).
VisioTOP 300 – Dedicated Positioning Bench
VisioTOP 300 bench has been designed and dedicated for stable and repeatable positioning and re-positioning between the different measuring times points. Managing the volunteers and getting reliable and repeatable results becomes much easier. This bench supports DermaTop-HE, EvaSKIN and EvaFACE for all types of face analysis.
The volunteer is sitting and is adjusted in height using a motorized actuator to be in the right position relative to the head and keeps limiting its movements. A laser and a mirror allow the person to place his face repeatedly at each time.
Repositioning is completely reproduceable thanks to VisioTOP300 and Software AEVA-V4 and will be saved for next measurement.
Powerful Software Aeva-V4
New Aeva software (Aeva-V4) guides the user through acquisition routine, runs automatic batch processing and evaluation of the 3D data providing results as CSV files, figures and pictures. It offers unique multi zones, multi-scaling analysis functionalities.
visioTOP300 Bench for face
Software Aeva-V4
Where to use:
Global face testing can extract local zones which are comonly used as references to illustrate product or treatment effects in cosmetics or dermatology, but also opens shape and volume changes analysis as well as a global detection of features like fine lines, wrinkles & folds.
Zone Extraction:
| Crow’s feet Eye bags Cheek & Upper cheek Upper lips & lips |
Glabella Nasal Lips corner |
Eye bags Cheek Sagging and oval |
Shape & Volume:
| Firming and re-pulping
Anti ageing Reshaping |
Dimensional:
| Reshaping, re-pulping : Distance ,Section length and angles |
Quick fact EvaFACE-S5:
- A patented fringe projection unit combined with stereo imaging techniques
- Automatic or interactive areas extraction
- High resolution system (2 x 5 Mpixels B/Wcameras)
- Easy to switch from an application to an other
- one fixed FOV- Large (300)
- Very powerful analysis and evaluation software.
- Simple to use, minimum setting and skill required
EvaSKIN-S5
Standard 3D imaging system
Local Zone or Face part
Skin Analysis
EvaSKIN-S5
A non-contact skin topography system used for research and development and evaluation of skin care cosmetics, anti-aging products and treatments.
Based on a patented fringe projection unit combined with stereo imaging techniques, the DermaTOP-HE system offers best performances and flexibility to address different studies/measurements from Skin micro structure to wrinkles and sagging. It is designed to quantify efficacy assessment for cosmetics, aesthetical and dermatology products and treatments.
EvaSKIN measure and analyze the local range (part of the face) as a three-dimensional image . Furthermore, up to 4 zone parts are extracted and data is analyzed individually. For effect testing of cosmetics and skin care products. Simple, accurate, high-resolution 3D image measurement of fine lines and wrinkles.
| Field Of View | FOV-M
125 |
| Local | ✓ |
| Face part | ✓ |
Local zone: Skin micro structure, pores, fine lines & wrinkles evaluation, skin replica, eye bags, lips and sagging, cheek, nasal folds, glabella, dimples and nodules for cellulite
Face part: rejuvenation, fillers, mesotherapy, firming, reshaping, restructuring, anti-ageing
Watch the video
System Configuration
Technology
The state of the art combining fringes projection and stereovision, also called active stereometry, provides largest fields of view with the highest resolution. It offers pixel resolution in X, Y, high accuracy in Z, less sensitive to movement.
EvaSKIN equipped with two 5-megapixel black-and-white cameras. Achieves a wide FOV (field of view) of about 1/4 of the face with high resolution while emphasizing 3D measurement to perform a high resolution local zone and face part measurement.
- Image capture, analysis, and evaluation are easy with dedicated software that uses many automatic routines.
- Two levels of “user” and “expert” are adopted.
- Supports simpler operations at the “user” level. Guidance by displaying a step-by-step support image to the operator.
- “Expert” enables interactive analysis. Uses original aging evaluation processing (face).
VisioTOP 300 – Dedicated Positioning Bench
VisioTOP 300 bench has been designed and dedicated for stable and repeatable positioning and re-positioning between the different measuring times points. Managing the volunteers and getting reliable and repeatable results becomes much easier. This bench supports DermaTop-HE, EvaSKIN and EvaFACE for all types of face analysis.
The volunteer is sitting and is adjusted in height using a motorized actuator to be in the right position relative to the head and keeps limiting its movements. A laser and a mirror allow the person to place his face repeatedly at each time.
Repositioning is completely reproduceable thanks to VisioTOP300 and Software AEVA-V4 and will be saved for next measurement.
Powerful Software Aeva-V4
New Aeva software (Aeva-V4) guides the user through acquisition routine, runs automatic batch processing and evaluation of the 3D data providing results as CSV files, figures and pictures. It offers unique multi zones, multi-scaling analysis functionalities.
visioTOP300 Bench for face
Software Aeva-V4
Where to use:
Local zone:
| – 2D or 3D roughness statistics |
| – Height distribution on topographies Statistics (number, volume, area, depth, circumference) on pores, Fine lines, wrinkles and folds |
| – Skin features density of pores, Fine lines and wrinkles |
| – Deviation(pseudo color display),volume of the topographies (eye bags, lips, sagging and oval) |
Face part:
| – Multi zone extraction and analysis |
| – Comparison on the shape changes with statistical deviation and pseudo color display |
| – Volume of the difference, section length, distance between points and angle calculations |
| – Skin features density (pores, fine lines wrinkles and folds) |
| – Section length, distance and angle measurements |
Quick fact EvaSkin-S5:
- A patented fringe projection unit combined with stereo imaging techniques
- Automatic or interactive areas extraction
- Amplitude, roughness, volume, areas, circumference evaluation
- High resolution system (2 x 5 Mpixels cameras)
- Easy to switch from an application to an other
- one fixed FOV- Medium (125)
- Very powerful analysis and evaluation software.
- Simple to use, minimum setting and skill required
EvaTHERM
Thermal distribution analysis
Compact and precise
A strong tool for thermography
The EvaTHERM system has been designed to analyze thermal distribution and changes on the skin due to non-contact infrared measurements to evaluate the efficacy of cosmetic, dermatologic and aesthetical products and treatments.
| Field Of View | 250 | 470 | 361 | 677 | 465 | 873 |
System Configuration
The compact thermal camera EvaTHERM can measures the thermal range from -20 to 100 °C in 0.04 k thermal resolution. The accuracy for such a measurement is 2%. It means it can detect any changes on the skin surface for clinical assessment. The system is full USB compatible and connected to PC easily. The image resolution is 382 x 288 pixels.
Dedicated Positioning Bench
This compact infrared camera can be integrated on any of our positioning benches (VisioTOP300/500 and Visio-4D)
The volunteer is sitting and is adjusted in height using a motorized actuator to be in the right position relative to the head and keeps limiting its movements. A laser and a mirror allow the person to place his face repeatedly at each time.
Repositioning is completely reproduceable thanks to our all positioning bench and Software AEVA-V4 and will be saved for next measurement.
Powerful Software
The EvaTHERM software can track specific areas and give statistical deviation, tracks hot and cold spots, provides profiles, distributions and many other characteristics.
visioTOP500 Bench
visio-4D Universal Bench
Where to use:
Anywhere you need thermal analysis on skin:
- Follow up erythema, inflammation processes
- Follow up cooling, wellness process
- Thermal distribution analysis
- Follow up hot spots
- Before/after comparison
Quick fact EvaTHERM:
- Images or video mode
- Automation of data processing
- Multi-zones on face or any part of the body
- Simple to connect USB ready
- Can be driven by our AEVA-Software
Ultrascan UC 22
High resolution 22 MHz ultrasound
in medicin and cosmetics
Skin ultrasound is a powerful, non-invasive, cost-effective and
real-time technique that improves your daily practice when diagnosing,
treating and monitoring skin tumours, vascular tumours,
skin inflammatory diseases, nail lesions and cosmetic procedures. 22MHz ultrasound and B mode image is interested for this purpose.
Where to use:
- skin aging & sun damage
- tumor surgery
- tumor depth, especially before surgery
- skin thickness
- laser treatment
- wound treatment
- cosmetic research & efficacy testing
- tissue beneath wounds
- With 22 MHz you can look 6-8 mm deep into the skin in high resolution.
- The probe is made for easy handling and does all scans automatically without further movement by the user. The
transducer goes linearly over the skin - Only water is needed to receive a scan, no messy gel application. Foils are not necessary but can be used optionally
- Continuous live scans, not only one single scan per measurement (video of 10 images per B-scan)
- Automatic measurement between set lines of skin thickness in µm and skin density(ultrasound density in % and as a colour value between 0 and 256 a.u.) for the total image and split for epidermis/entrance echo and dermis.
- In addition measurements of depth and width and length of lines and area (also drawn in freehand)
- The measurements of up to 6 areas per image can be saved.
- Phase correction (flattening of the image) to determine skin thickness as exactly as possible
- The viewing depths can be changed from 8 mm to 6.4 or 4 mm to better see details in the upper layers (no resolution change).
- The images of the B-scan can be exported as image-files to be used in other applications.
- The probe head can easily be cleaned after each measurement
CBright
Standard facial photography system
High quality and fully-controlled
For clinical follow-up and scientific publication
CBright
The Cbright as been designed to simplify and standardize photographic acquisitions using smartphone, tablets or professional digital cameras. The system take care of the position of the patient/volunteer and the camera itself. Predefined angles are set to get reproducible photographs including illumination and color control
Where to use:
It’s used for documenting and archiving the volunteer/patient photos for clinical trials and/or treatment follow-up while all factors are being taken into account for a reproduceable outcome.
Quick fact CBright:
- Centering capability of the patient face with the unique holding device
- Laser alignment to control the position before and after
- Grid alignment on smartphones or digital camera to check positioning
- D65 Reproducible LED illumination
- Simple to use with predefined angles of view
- Motorized vertical adjustment & angular setting
VisioFace® RD
High Resolution Standardized Full Face Photography for Treatment Documentation
The Visioface RD is a full face photographic system. What does it do?
The VisioFace® RD and its software have been developed in cooperation with Monaderm to take high resolution full face photos under standardized conditions. It is focused on simple organisation of the photos and detailed comparisons.
Where to use:
- treatment documentation
- making studies
- Zoom into several images at the same time to compare. Up to 10 images can be viewed in tile view, and more images in pile view.
- Different print options (images by study, person, time or only the details of a study)
- All changes of the data in a study are recorded in a “history”.
Quick fact VisioFace® RD
- Removable head and chin rest allowing exact positioning frontally or
sidewise - Repositioning of the face reproducibly: overlays (ghost images) of previous images of the person and drawing of marks on interesting parts are possible.
- A color chart is photographed with each face to make photos comparable over time and ambient light conditions.
- No heat development from the LEDs.
- Conveniently designed software to enable you to work quickly.
- Easy creating of studies with patients/volunteers and different stages.
- Perfect organization of all photos for later comparisons.
OTHER PRODUCTS
